HT Hengtong 16S 40A NMC BMS for 60V Li-ion Battery with Balance & TTL – P16S40A1TNS
₹1,299.00
HT Hengtong P16S40A1TNS 16S 40A BMS designed for 60V-class NMC / Li-ion battery packs used in electric scooters, EVs and custom lithium battery systems.
- 16S NMC / Li-ion BMS
- 59.2V Nominal Battery Voltage
- 67.2V Full-Charge Voltage
- 40A Current Rating
- Common-Port Charge & Discharge
- Built-in Cell Balancing
- TTL Communication
- Integrated temperature sensing
- Overcharge & over-discharge protection
- Over-current & short-circuit protection
- Metal-protected PCB construction
- Suitable for electric scooters, e-bikes, EVs and custom 60V lithium battery packs
Important: This BMS is intended for 16S NMC / Li-ion battery packs. Battery chemistry, series configuration and current requirement must be verified before installation.
1 in stock
1. Product Overview
The HT Hengtong P16S40A1TNS 16S 40A BMS is a Battery Management System designed for 16-series NMC / Li-ion battery packs.
The actual unit shown is manufactured by Jiujiang Hengtong Autocontrol Device Co., Ltd. and is marked:
- Model: P16S40A1TNS
- Configuration: 16S
- Current Rating: 40A
- Port Type: Common Port
- Balancing: Built-in
- Communication: TTL
Indian BMS suppliers currently list the exact P16S40A1TNS model as an NMC 16S 40A Hengtong/HT BMS.
Jiujiang Hengtong also lists BMS protection boards among its new-energy product range.
2. Electrical Configuration
- Battery Chemistry: NMC / Li-ion
- Series Configuration: 16S
- Nominal Cell Voltage: Approx. 3.7V
- Nominal Pack Voltage: Approx. 59.2V
- Normal Full-Charge Voltage: Approx. 67.2V
- Current Rating: 40A
- Port Configuration: Common Port
- Balancing: Built-in
- Communication Interface: TTL
- BMS Type: Protection BMS with communication interface
Battery Voltage Calculation
Nominal Voltage
16 × 3.7V = 59.2V
Full-Charge Voltage
16 × 4.2V = 67.2V
This configuration is commonly used in 60V-class electric scooter and EV battery packs.
3. Common-Port Design
This BMS uses a common-port configuration.
In a common-port BMS, the charging and discharging current share the same controlled power path.
This simplifies battery-pack wiring and is commonly used in:
- Electric scooters
- Electric motorcycles
- E-bikes
- Light electric vehicles
- Custom lithium battery packs
4. Built-in Cell Balancing
The P16S40A1TNS includes a balancing function for the 16 series cell groups.
Cell balancing helps reduce voltage differences between individual series groups during charging.
Benefits include:
- Better cell-voltage uniformity
- Reduced risk of one cell group reaching protection voltage prematurely
- Improved usable battery capacity
- More stable pack operation
- Better long-term battery performance
5. TTL Communication
A key feature of this BMS is its TTL communication interface, which is explicitly stated on the product label.
TTL communication may be used for compatible:
- Battery diagnostic equipment
- Monitoring interfaces
- Service tools
- External controllers
- OEM battery systems
Important
TTL communication should not automatically be assumed to mean:
- Bluetooth
- CAN
- RS485
- Mobile-app monitoring
The external device must support the correct Hengtong TTL protocol.
6. Battery Protection Functions
The BMS is designed to provide essential lithium battery protection including:
- Cell overcharge protection
- Cell over-discharge protection
- Discharge over-current protection
- Charge over-current protection
- Short-circuit protection
- Temperature protection
- Cell balancing
- Cell-voltage monitoring
These functions help protect the battery pack against abnormal electrical and operating conditions.
7. 40A Current Rating
The unit is rated at 40A.
This makes it suitable for medium-power lithium battery systems where the continuous battery current remains within the BMS, cell, busbar, connector and cable limits.
Typical applications can include:
- Electric scooters
- Electric bicycles
- Light electric motorcycles
- Robotics
- AGVs
- Custom EV battery systems
Always check the controller’s battery current, not only the motor wattage, before selecting the BMS.
8. Temperature Monitoring
The unit includes a temperature-sensing lead.
Temperature monitoring allows the BMS to detect abnormal battery or BMS temperature conditions and provide protection when required.
Correct sensor placement is important for reliable temperature monitoring.
The sensor should normally be positioned where it can accurately detect battery-pack temperature without being mechanically damaged.
9. Suitable Applications
This BMS is suitable for compatible 16S NMC / Li-ion battery packs used in:
- Electric scooters
- Electric bicycles
- Electric motorcycles
- Electric three-wheelers
- Light electric vehicles
- Robotics
- AGVs
- Industrial battery systems
- Custom lithium-ion battery packs
- 60V-class EV batteries
10. Ideal for 60V NMC Battery Packs
A 16S NMC battery has an approximate:
- Nominal Voltage: 59.2V
- Full-Charge Voltage: 67.2V
Therefore, it is commonly marketed as a 60V lithium battery system.
This makes the P16S40A1TNS suitable for many 60V-class electric scooter battery designs, provided the battery uses a 16S NMC configuration and its required continuous current remains within the BMS rating.
11. Compatibility Check Before Ordering
Before buying this BMS, confirm all of the following:
- Battery chemistry is NMC / Li-ion
- Battery configuration is exactly 16S
- Nominal pack voltage is approximately 59.2V
- Charger voltage is appropriate for a 16S NMC pack
- Required current is within 40A
- Common-port wiring is suitable
- Balance-wire sequence matches the battery
- TTL communication is compatible if communication is required
Do not select a BMS only by the advertised “60V” rating.
A 60V-class LiFePO₄ battery can use a different series count and different protection settings from a 60V NMC battery.
12. Installation Guidelines
Correct balance-wire installation is critical.
Before connecting the BMS:
- Verify all 16 series groups individually
- Confirm the balance-wire order
- Measure voltage between consecutive balance wires
- Verify the battery negative connection
- Confirm charge/discharge wiring
- Properly insulate all exposed conductors
- Use suitably rated cables and connectors
- Secure the BMS against vibration and movement
- Position the temperature sensor correctly
Do not plug the balance connector into the BMS until the wiring sequence has been verified.
13. Important Safety Note
Do not:
- Use this BMS with the wrong battery chemistry
- Connect it to a different series configuration
- Reverse battery polarity
- Connect balance wires in the wrong sequence
- Exceed the BMS current rating
- Short the output terminals
- Operate with damaged cells or insulation
- Install the BMS where conductive debris can contact the PCB
Professional installation is recommended for high-energy EV lithium battery packs.
