DALY 15S 40A LiFePO₄ BMS for 48V LFP Battery with Balance & NTC

₹1,399.00

DALY 15S 40A BMS designed for 48V LiFePO₄ battery packs used in electric vehicles, solar storage, inverter batteries and custom LFP systems.

  • 15S LiFePO₄ / LFP BMS
  • 48V Nominal Battery System
  • 40A Continuous Discharge Current
  • 40A Charge Current
  • Common-Port / Same-Port Design
  • Built-in Cell Balancing
  • NTC Temperature Sensor
  • Overcharge & over-discharge protection
  • Over-current protection
  • Short-circuit protection
  • High-temperature protection
  • High-current B- and P- cables
  • Complete 15S balance-wire harness
  • Suitable for EV, solar, inverter, UPS and custom LiFePO₄ battery packs

Important: This BMS is designed for 15S LiFePO₄ batteries. Do not use it with NMC/Li-ion packs unless the BMS is specifically configured for that chemistry.

2 in stock

1. Product Overview

The DALY 15S 40A LiFePO₄ BMS is a Battery Management System designed to protect and manage 15-series 3.2V LiFePO₄ battery packs.

The actual unit is marked:

  • Brand: DALY
  • Battery Chemistry: LiFePO₄
  • Configuration: 15S
  • System Voltage: 48V
  • Discharge Current: 40A
  • Charge Current: 40A
  • Temperature Sensor: NTC
  • Connections: B- and P-
  • Balancing: Balance-wire harness included

DALY’s official documentation includes dedicated wiring diagrams for 15S battery packs and identifies the B- battery-negative and P- charger/load-negative connections used by this design.


2. Electrical Specifications

  • Battery Chemistry: LiFePO₄ / LFP
  • Series Configuration: 15S
  • Nominal Cell Voltage: 3.2V
  • Nominal Battery Voltage: 48V
  • Typical Full-Charge Voltage: 54.75V
  • Discharge Current Rating: 40A
  • Charge Current Rating: 40A
  • Port Type: Common Port / Same Port
  • Temperature Monitoring: NTC sensor
  • Balancing: Built-in passive cell balancing
  • BMS Type: Hardware protection BMS

Battery Voltage Calculation

Nominal Voltage

15 × 3.2V = 48V

Typical Maximum Charge Voltage

15 × 3.65V = 54.75V

The exact charger voltage should always follow the specification of the LiFePO₄ cells used in the battery pack.


3. 40A Charge & Discharge Capability

The product label specifies:

  • Discharge Current: 40A
  • Charge Current: 40A

This makes the BMS suitable for medium-power 48V LiFePO₄ battery packs.

When designing the complete pack, the safe current capability must also consider:

  • Cell current rating
  • Busbars
  • Nickel or copper interconnections
  • Battery cables
  • Connectors
  • Fuse
  • Motor controller or inverter current

The BMS rating alone does not determine the maximum safe current of the completed battery pack.


4. Common-Port Design

The DALY BMS uses B- and P- connections.

In this configuration:

  • B- connects to the battery-pack negative
  • P- is used for the controlled negative connection to the charger/load

DALY’s official wiring documentation shows this common negative-path architecture across its 15S battery configurations.


5. Built-in Cell Balancing

The BMS uses individual sense wires connected across all 15 series groups.

The balancing system helps:

  • Reduce voltage differences between cells
  • Improve pack uniformity
  • Prevent one cell group reaching the charge limit much earlier than the others
  • Improve usable battery capacity
  • Support stable long-term battery operation

Correct balance-wire installation is essential for proper BMS operation.


6. NTC Temperature Sensor

The supplied BMS includes an NTC temperature sensor.

DALY’s official documentation identifies the NTC connection as the temperature-control interface used by the BMS.

The sensor should be positioned where it can accurately detect battery-pack temperature.

Temperature monitoring helps protect against abnormal operating conditions such as excessive heat during charging or discharging.


7. Battery Protection Functions

The DALY BMS is designed to provide the essential protection functions expected in a LiFePO₄ battery pack, including:

  • Cell over-voltage protection
  • Cell under-voltage protection
  • Charge over-current protection
  • Discharge over-current protection
  • Short-circuit protection
  • Temperature monitoring
  • Cell balancing

The BMS can interrupt the controlled current path when unsafe operating conditions are detected.


8. Suitable Applications

Suitable for compatible 15S 48V LiFePO₄ battery packs used in:

  • Electric scooters
  • Electric bicycles
  • Electric motorcycles
  • Electric three-wheelers
  • Solar battery systems
  • Home energy storage
  • Inverter batteries
  • UPS systems
  • Robotics
  • AGVs
  • Portable energy storage
  • Custom LiFePO₄ battery packs

9. Why 15S LiFePO₄?

A 15S LiFePO₄ battery uses 15 cells or parallel cell groups connected in series.

With a nominal cell voltage of approximately 3.2V:

15 × 3.2V = 48V

This makes 15S suitable for many applications designed around a 48V battery system.

However, 15S and 16S LiFePO₄ batteries have different voltage ranges, so compatibility with the charger, inverter or controller must be confirmed.


10. Compatibility Check Before Ordering

Before purchasing this BMS, confirm:

  • Battery chemistry is LiFePO₄ / LFP
  • Battery configuration is exactly 15S
  • Nominal battery voltage is approximately 48V
  • Charger is suitable for a 15S LFP battery
  • Continuous current requirement is within 40A
  • Balance-wire configuration matches your battery pack
  • B- and P- wiring matches your battery design

Do not select a BMS only on the basis of “48V”.

48V NMC and 48V LiFePO₄ battery packs use different cell counts and protection settings.


11. Installation Guidelines

Before connecting the BMS:

  • Verify all 15 cell-group voltages
  • Confirm balance-wire sequence
  • Measure voltage between consecutive sense wires
  • Connect B- correctly to battery negative
  • Connect P- according to the battery wiring design
  • Position the NTC sensor correctly
  • Insulate all high-current connections
  • Use correctly rated cables and connectors
  • Secure the BMS against vibration and movement

Do not connect the balance harness until the wiring order has been verified.


12. Important Safety Note

Do not:

  • Use with NMC cells
  • Use with an incorrect number of series cells
  • Reverse the battery polarity
  • Connect balance wires incorrectly
  • Exceed the 40A current rating
  • Short the battery terminals
  • Operate with damaged cells or insulation
  • Install where moisture or conductive debris can reach the BMS

Professional installation is recommended for high-capacity lithium battery packs.