-7%
₹22,999.00 Original price was: ₹22,999.00.₹21,362.00Current price is: ₹21,362.00.
The Electrovolt 60V 32Ah LiFePO4 Battery is designed for compatible electric scooters and other 60V electric two-wheelers requiring a reliable lithium battery replacement.
Built using Lithium Iron Phosphate (LiFePO4) chemistry, this battery combines good thermal stability, long cycle-life potential and dependable everyday EV performance. The battery comes in a sturdy hard casing with carrying handle, high-current connector and 1-year warranty.
2 in stock
The Electrovolt 60V 32Ah LiFePO4 electric scooter battery is a high-capacity replacement battery designed for compatible electric two-wheelers operating on a 60V battery system.
The battery uses LiFePO4 chemistry, which is widely preferred in applications where thermal stability, long service life and consistent discharge performance are important.
Its enclosed hard-case construction protects the internal cells and electronics while the integrated handle makes the pack easier to remove, carry and service.
The battery is rated at:
A higher Ah rating allows the battery to store more charge and can provide longer riding range than a lower-capacity battery used under otherwise similar conditions.
Electrovolt currently markets its 60V 32Ah electric two-wheeler battery with a claimed range of up to approximately 70 km.
Actual riding range can vary depending on:
For this reason, range should always be treated as an estimate rather than a guaranteed figure.
This battery is labelled Lithium Iron Phosphate (LiFePO4).
LiFePO4 batteries are commonly selected for EV applications because of their:
A lithium EV battery pack requires a Battery Management System (BMS) to monitor and protect the cells during charging and discharging.
Depending on the exact BMS configuration, protection normally includes functions such as:
The BMS is an important safety component, but the battery must still be used with the correct charger and compatible vehicle electrical system.
The battery is housed in a rigid enclosure designed for electric-vehicle use.
The integrated top handle makes the battery easier to lift and carry when removed from the scooter.
The battery is supplied with a high-current connector suitable for compatible electric scooter power connections.
Before ordering, always compare:
with your existing battery.
A matching voltage alone does not guarantee physical or electrical compatibility.
Use only a charger specifically designed for the battery’s:
Do not use a charger intended for lead-acid, NMC or another battery chemistry unless its charging profile and voltage are specifically confirmed as compatible with this battery.
For a conventional 20S LiFePO4 configuration, the typical maximum charge voltage would be:
20 × 3.65V = 73.0V
However, the exact series configuration and recommended charger voltage should be confirmed for the supplied battery before connecting a charger.
This battery may be suitable for compatible:
Compatibility must be checked before installation.
| Specification | Details |
|---|---|
| Brand | Electrovolt |
| Product Type | Electric Scooter Lithium Battery |
| Voltage | 60V Class |
| Capacity | 32Ah |
| Chemistry | LiFePO4 |
| Battery Type | Rechargeable |
| Application | Electric Scooter / Electric Two-Wheeler |
| Case Type | Hard Enclosure |
| Carry Handle | Yes |
| High-Current Connector | Yes |
| Warranty | 1 Year |
| Advertised Range | Up to approx. 70 km* |
*Actual range varies according to vehicle, rider, road and operating conditions.
Before purchasing, verify the following with your existing battery or scooter:
If any of these differ, the battery may not be a direct replacement.
1 Year Warranty
Warranty coverage is subject to applicable terms and conditions and generally excludes physical damage, incorrect charging, water damage, wiring modifications, short circuits and misuse.
1 × Electrovolt 60V 32Ah LiFePO4 Electric Scooter Battery
Charger is not included unless specifically mentioned with the product.
Yes. This Electrovolt 60V 32Ah LiFePO₄ electric scooter battery comes with a 1-year warranty, subject to the applicable warranty terms and conditions. Physical damage, incorrect charging, water damage, unauthorized modification or misuse may not be covered.
A 60V-class LiFePO₄ scooter battery commonly uses a 20S configuration. With a maximum charging voltage of approximately 3.65V per cell, the full-charge voltage is approximately 73V.
20 × 3.65V = 73V
Always confirm the exact charger specification supplied or recommended for this battery before use.
Yes, a lithium EV battery pack requires a Battery Management System (BMS) to monitor and protect the cells during charging and discharging. Typical BMS functions include over-voltage, under-voltage, over-current and short-circuit protection. The exact BMS specifications should be confirmed for the supplied battery.
A charger should be considered included only if it is specifically mentioned in the product package or offer. If purchased separately, use only a charger compatible with the battery’s LiFePO₄ chemistry, charging voltage and permitted charging current.
Both may be sold as 60V 32Ah electric scooter batteries, but they use different lithium chemistries and can have different charging voltages, cell configurations, weight, cycle life and discharge characteristics. A LiFePO₄ battery should not automatically replace an NMC battery just because the voltage and Ah rating appear the same. The charger, controller, connectors, dimensions and voltage limits must also be compatible. PowerKart already emphasizes that same-voltage NMC and LFP batteries are not automatically interchangeable.
No account yet?
Create an AccountWhatsApp us