-13%
₹28,999.00 Original price was: ₹28,999.00.₹25,297.00Current price is: ₹25,297.00.
The Electrovolt 60V 40Ah LiFePO4 Battery is a high-capacity lithium battery designed for compatible 60V electric scooters and electric two-wheelers.
With 40Ah capacity, durable hard-case construction, high-current connector, integrated carrying handle and 1-year warranty, it is suitable for riders looking for a dependable replacement or higher-capacity EV battery.
2 in stock
The Electrovolt 60V 40Ah lithium battery is designed for electric scooters requiring a 60V-class battery system and higher energy storage capacity.
At the same nominal voltage, a 40Ah battery stores approximately 25% more energy than a 32Ah battery:
60V × 40Ah = 2,400Wh ≈ 2.4kWh
This additional capacity can provide increased riding range where the scooter, controller, battery dimensions and electrical system are compatible.
The battery uses Lithium Iron Phosphate (LiFePO4) chemistry.
LiFePO4 batteries are commonly used in electric vehicles because they offer:
The battery is rated at:
| Specification | Details |
|---|---|
| Brand | Electrovolt |
| Voltage | 60V Class |
| Capacity | 40Ah |
| Nominal Energy | Approx. 2.4kWh |
| Chemistry | LiFePO4 |
| Battery Type | Rechargeable Lithium Battery |
| Application | Electric Scooter / EV |
| Enclosure | Hard Case |
| Carry Handle | Yes |
| Warranty | 1 Year |
Generally, yes—provided the comparison is between batteries of the same voltage and chemistry.
For example:
The 40Ah battery stores approximately 25% more nominal energy than a 32Ah battery.
However, actual riding range depends on motor efficiency, controller, rider weight, speed, road gradient, tyre pressure, traffic and battery condition.
The battery pack incorporates battery-management protection for safe charging and discharging.
Typical BMS functions may include:
The exact BMS current rating should be confirmed against the scooter’s motor and controller requirements before installation.
The battery is housed inside a robust protective enclosure.
The battery is supplied with a heavy-duty connector for compatible EV installations.
Before ordering, compare your existing battery’s:
The voltage and Ah rating alone are not sufficient to guarantee compatibility.
Always use a charger specifically matched to the battery’s LiFePO4 chemistry and charging voltage.
A common 60V-class LiFePO4 EV battery uses a 20S configuration:
20 × 3.2V = 64V nominal
20 × 3.65V = 73V maximum charge voltage
Therefore, many 60V-class 20S LiFePO4 batteries use a charger with approximately 73V output.
However, the exact recommended charger voltage for this battery should be confirmed before use.
The Electrovolt 60V 40Ah battery may be suitable for compatible:
Compatibility must be checked before installation.
Please confirm the following before ordering:
A 60V battery from one scooter is not automatically compatible with every other 60V scooter.
This Electrovolt 60V 40Ah LiFePO4 battery comes with a 1-year warranty.
Warranty coverage is subject to applicable terms and conditions and may exclude:
1 × Electrovolt 60V 40Ah LiFePO4 Electric Scooter Battery
Charger is not included unless specifically mentioned with the product.
Not necessarily. The 40Ah rating mainly represents battery capacity, so its primary benefit is potentially longer riding time and range. Electric scooter top speed depends mainly on the motor, controller, battery voltage and vehicle design. A higher-capacity battery may maintain voltage better under load, but it should not be purchased expecting an automatic increase in top speed.
It can be suitable for daily-use electric scooters if the battery voltage, BMS current capability, connectors, dimensions and scooter controller are compatible. For intensive delivery use, also consider daily kilometres travelled, charging frequency, motor power, payload and operating temperature before selecting the battery.
If the battery has become noticeably hot after a long ride, allow it to cool before charging. Charging a very hot lithium battery can increase thermal stress and may cause the BMS or charger protection to activate. For normal use, charge the battery in a dry, ventilated location using the recommended LiFePO4 charger.
A LiFePO4 battery does not require water topping or electrolyte maintenance like a conventional lead-acid battery. However, periodically inspect the battery casing, connector, cables and terminals for damage, looseness or overheating, and always use the correct charger.
Yes. This Electrovolt 60V 40Ah LiFePO4 electric scooter battery comes with a 1-year warranty. Warranty coverage is subject to the applicable terms and conditions. Damage caused by incorrect charging, physical damage, water ingress, unauthorized modification or misuse may not be covered.
No account yet?
Create an AccountWhatsApp us