JBD JIABAIDA 17S 50A BMS for 60V NMC Li-ion Battery with Balance – ZP20S007-T

₹1,799.00

JBD JIABAIDA 17S 50A hardware BMS designed for 17-series 3.7V NMC / Li-ion battery packs used in electric scooters, EVs and custom lithium battery systems.

  • 17S NMC / Li-ion BMS
  • 62.9V Nominal Battery Voltage
  • 71.4V Normal Full-Charge Voltage
  • 50A Continuous Charge & Discharge Rating
  • Common Port / Same Port Design
  • Built-in Cell Balancing
  • Approx. 50mA Typical Balance Current
  • Integrated temperature monitoring
  • Overcharge & over-discharge protection
  • Over-current & short-circuit protection
  • Compact aluminium-covered hardware BMS
  • Suitable for 60V-class electric scooter and EV lithium battery packs

Important: This unit is configured for 17S 3.7V Li-ion / NMC cells. Always confirm battery chemistry, series configuration and current requirement before installation.

2 in stock

1. Product Overview

The JBD JIABAIDA ZP20S007-T V1.0 17S 50A BMS is a hardware Battery Management System designed to protect and manage 17-series lithium-ion / NMC battery packs.

The actual unit is marked:

  • Brand: JBD / JIABAIDA
  • Model: ZP20S007-T V1.0
  • Battery Chemistry: Li-ion 3.7V
  • Configuration: 17S
  • Continuous Current: 50A
  • Port Type: Common Port
  • Balancing: Built-in Balance Function

The ZP20S007 platform is designed for 16–20S lithium battery configurations and supports continuous-current variants between 30A and 60A.


2. Electrical Specifications

  • Battery Chemistry: NMC / Li-ion
  • Cell Nominal Voltage: 3.7V
  • Series Configuration: 17S
  • Nominal Pack Voltage: 62.9V
  • Normal Full-Charge Voltage: 71.4V
  • Continuous Charge Current: 50A
  • Continuous Discharge Current: 50A
  • Port Configuration: Common Port / Same Port
  • Quiescent Consumption: ≤60µA
  • Circuit Resistance: ≤10mΩ
  • Operating Temperature: -20°C to +75°C
  • BMS Type: Hardware BMS

The manufacturer specifies same-port charging and discharging, ≤60µA consumption, ≤10mΩ circuit resistance and -20°C to +75°C operating temperature for the ZP20S007 family.


3. Battery Voltage Configuration

For a 17S NMC battery pack:

Nominal Voltage

17 × 3.7V = 62.9V

Normal Maximum Charge Voltage

17 × 4.2V = 71.4V

This configuration is commonly used in 60V-class lithium battery systems.

The manufacturer’s BMS protection specification allows cell voltage monitoring across approximately 2.7V to 4.25V per cell. The 4.25V figure is a protection threshold and should not be confused with the normal recommended 4.2V charging target for standard NMC cells.


4. Built-in Cell Balancing

The BMS includes integrated balancing to help maintain uniform voltage across all 17 series groups.

Balance Specifications

  • Balance Function: Built-in
  • Balance Type: Pulse Equalization
  • Typical Balance Start Voltage: Approx. 3.90V per cell
  • Typical Balance Current: Approx. 50mA
  • Specified Balance Current Range: 40–60mA

Cell balancing helps reduce voltage differences between series groups during charging and supports stable long-term battery pack operation.


5. Common-Port Design

This unit uses a Common Port / Same Port configuration.

Charging and discharging share the same controlled current path, helping simplify battery-pack wiring compared with separate-port BMS designs.

This configuration is well suited to electric scooters, electric motorcycles and other applications where the charge and discharge connections are designed around a common BMS port.


6. Battery Protection Functions

The ZP20S007 platform provides multiple layers of battery protection, including:

  • Cell overcharge protection
  • Cell over-discharge protection
  • Charging over-current protection
  • Discharging over-current protection
  • Short-circuit protection
  • Charging high-temperature protection
  • Charging low-temperature protection
  • Discharging high-temperature protection
  • Discharging low-temperature protection
  • MOSFET temperature protection
  • Cell balancing
  • Cell-disconnection protection

These functions help protect the cells and battery pack from abnormal electrical and temperature conditions.


7. Cell Voltage Protection

Typical manufacturer protection thresholds for the NMC configuration are:

  • Overcharge Protection: Approx. 4.25V/cell
  • Overcharge Recovery: Approx. 4.15V/cell
  • Over-discharge Protection: Approx. 2.70V/cell
  • Over-discharge Recovery: Approx. 2.90V/cell

These are BMS safety thresholds, not recommended everyday charging and discharging targets.


8. 50A Current Protection

For the 50A version, the manufacturer’s protection table specifies approximately:

  • Continuous Current: 50A
  • Charge Over-current Protection: 95A ±20A
  • Stage-1 Discharge Over-current Protection: 95A ±20A
  • Stage-2 Discharge Over-current Protection: 380A ±30A
  • Short-Circuit Protection Reference: 760A ±50A

The connected vehicle or equipment should normally operate within the BMS’s 50A continuous-current rating.


9. Physical Specifications

  • Approx. BMS Length: 120 ±1mm
  • Approx. Width: 65 ±1mm
  • Approx. Height: 14 ±2mm
  • L × W × H: 120 × 65 × 14 mm
  • Protective metal cover
  • Heavy-current cables
  • Multi-wire cell-voltage sensing harness
  • Temperature sensing support

The dimensions refer to the BMS structure and do not include the complete external wiring harness.


10. Suitable Applications

Suitable for compatible 17S NMC / Li-ion battery packs used in:

  • Electric scooters
  • Electric motorcycles
  • Electric bicycles
  • Electric three-wheelers
  • Light electric vehicles
  • Robotics
  • AGVs
  • Custom 60V lithium battery packs
  • Industrial lithium battery systems
  • Battery-powered equipment

11. Ideal for 60V Electric Scooter Batteries

A 17S NMC battery has a nominal voltage of approximately 62.9V, making this BMS particularly suitable for many 60V-class electric scooter battery packs.

The 50A continuous-current rating also makes it appropriate for medium-power EV battery applications, provided the motor/controller current requirement remains within the battery and BMS limits.


12. Compatibility Check Before Ordering

Before purchasing, confirm:

  • Battery chemistry is NMC / Li-ion
  • Cell nominal voltage is approximately 3.6–3.7V
  • Battery configuration is exactly 17S
  • Normal maximum pack charging voltage is approximately 71.4V
  • Continuous current requirement does not exceed 50A
  • Common-port wiring is suitable for your battery design
  • Balance-wire sequence matches the pack

Battery voltage alone is not enough to select a BMS. Chemistry, series count and current rating must all match.


13. Installation Note

Correct balance-wire connection is critical.

Before plugging the balance connector into the BMS:

  • Verify all 17 series groups individually
  • Confirm the balance-wire sequence
  • Measure voltage between consecutive balance wires
  • Confirm correct B- and common-port connections
  • Insulate all high-current terminals
  • Use cables and connectors rated for the required current

Incorrect balance-wire sequence can permanently damage the BMS.

Professional installation is recommended for high-voltage lithium battery packs.


14. Safety Note

Do not:

  • Use with the wrong battery chemistry
  • Use with a different number of series cells
  • Reverse BMS polarity
  • Exceed the 50A continuous-current rating
  • Short the battery terminals
  • Connect balance wires in the wrong order
  • Operate with damaged cells, insulation or wiring

Always verify the complete battery pack before connecting the BMS.