JBD JIABAIDA 20S 40A BMS for 72V NMC Li-ion Battery with Balance – ZP20S007-T
₹1,799.00
JBD JIABAIDA 20S 40A hardware BMS designed for 72V-class NMC / Li-ion battery packs used in electric scooters, EVs and custom lithium battery systems.
- 20S NMC / Li-ion BMS
- 74V Nominal Battery Voltage
- 84V Normal Full-Charge Voltage
- 40A Continuous Charge & Discharge Rating
- Same-Port / Common-Port Design
- Built-in Cell Balancing
- Approx. 50mA typical balance current
- Overcharge & over-discharge protection
- Charge & discharge over-current protection
- Short-circuit protection
- Integrated temperature protection
- External NTC support
- Compact aluminium-covered hardware BMS
- Suitable for 72V electric scooters, EV battery packs and custom lithium batteries
Important: This particular unit is configured for 20S 3.7V Li-ion / NMC cells. Always verify chemistry, series count and required current before installation.
2 in stock
1. Product Overview
The JBD JIABAIDA ZP20S007-T V1.0 20S 40A BMS is a hardware Battery Management System designed for 20-series lithium-ion / NMC battery packs.
The supplied unit is marked:
- Brand: JBD / JIABAIDA
- Model: ZP20S007-T V1.0
- Battery Chemistry: Li-ion / NMC
- Cell Nominal Voltage: 3.7V
- Configuration: 20S
- Continuous Current: 40A
- Port Type: Same-Port / Common-Port
- Balancing: Built-in balancing
The BMS continuously monitors the battery pack and provides protection against abnormal cell voltage, excessive current, short circuits and temperature conditions.
2. Electrical Specifications
- Battery Chemistry: NMC / Li-ion
- Series Configuration: 20S
- Cell Nominal Voltage: 3.7V
- Nominal Pack Voltage: 74V
- Normal Full-Charge Voltage: 84V
- Continuous Charging Current: 40A
- Continuous Discharging Current: 40A
- Port Configuration: Same Port / Common Port
- Power Consumption: ≤60µA
- Circuit Resistance: ≤10mΩ
- Operating Temperature: -20°C to +75°C
- BMS Type: Hardware BMS
3. 72V Battery Configuration
For a 20S NMC / Li-ion battery pack:
Nominal Voltage
20 × 3.7V = 74V
Normal Full-Charge Voltage
20 × 4.2V = 84V
This configuration is commonly referred to in the EV market as a 72V lithium battery system.
The BMS itself monitors individual cell voltage up to its protection threshold of approximately 4.25V per cell.
4. Built-in Cell Balancing
The ZP20S007-T includes integrated cell balancing to help reduce voltage differences between the 20 series cell groups.
Balance Specifications
- Balance Function: Built-in
- Balance Type: Pulse Equalization
- Typical Balance Start Voltage: Approx. 3.90V per cell
- Balance Start Range: Approx. 3.85–3.95V
- Typical Balance Current: Approx. 50mA
- Balance Current Range: Approx. 40–60mA
Balancing helps keep individual series groups closer in voltage during charging and supports stable long-term battery-pack performance.
5. Same-Port Charge & Discharge
This BMS uses a same-port / common-port design.
Charging and discharging are controlled through the same BMS current path, simplifying battery-pack wiring and making it convenient for electric scooter and other EV battery applications.
6. Battery Protection Functions
The BMS provides multiple protection functions, including:
- Cell overcharge protection
- Cell over-discharge protection
- Charge over-current protection
- Discharge over-current protection
- Two-stage discharge over-current protection
- Short-circuit protection
- Charge high-temperature protection
- Charge low-temperature protection
- Discharge high-temperature protection
- Discharge low-temperature protection
- MOSFET high-temperature protection
- Cell balancing
- Cell-disconnection protection
- External NTC temperature sensing
7. Cell Voltage Protection
Typical manufacturer protection settings for the NMC configuration are:
- Overcharge Protection: Approx. 4.25V per cell
- Overcharge Recovery: Approx. 4.15V per cell
- Over-discharge Protection: Approx. 2.70V per cell
- Over-discharge Recovery: Approx. 2.90V per cell
These values are BMS protection thresholds and should not be treated as recommended everyday charging and discharging limits.
For normal NMC operation, the battery charger should typically be configured around 4.2V per cell / 84V for a 20S pack, subject to the cell manufacturer’s specification.
8. 40A Current Protection Configuration
For the 40A version, the manufacturer’s specification provides approximately:
- Continuous Current: 40A
- Charge Over-current Protection: 60A ±10A
- Stage-1 Discharge Over-current Protection: 60A ±10A
- Stage-2 Discharge Over-current Protection: 300A ±30A
- Short-Circuit Protection Reference: 600A ±50A
The connected motor controller and load should be selected so that normal continuous battery current remains within the BMS’s 40A continuous rating.
9. Temperature Protection
The BMS incorporates temperature-based protection.
Typical protection values include:
- Charge High-Temperature Protection: Approx. 65°C
- Charge High-Temperature Recovery: Approx. 60°C
- Discharge High-Temperature Protection: Approx. 75°C
- Discharge High-Temperature Recovery: Approx. 70°C
- MOSFET High-Temperature Protection: Approx. 105°C
- MOSFET Recovery: Approx. 75°C
External NTC temperature sensing is supported as part of the ZP20S007 platform.
10. Physical Specifications
- Approx. Length: 120mm
- Approx. Width: 65mm
- Approx. Height: 14mm
- Structure Size: Approx. 120 × 65 × 14 mm
- Construction: PCB with protective aluminium/metal cover
- Heavy-current power cables
- Multi-pin balance-wire connectors
- External temperature sensor
Dimensions exclude the complete external wiring harness and cable bends.
11. Suitable Applications
This 20S 40A BMS is suitable for compatible NMC / Li-ion batteries used in:
- Electric scooters
- Electric motorcycles
- Electric bicycles
- Electric three-wheelers
- Light electric vehicles
- Robotics
- AGVs
- Custom EV batteries
- 72V lithium battery packs
- Industrial battery-powered equipment
- DIY lithium battery projects
12. Ideal for 72V Electric Scooter Battery Packs
A 20S NMC battery pack provides approximately 74V nominal voltage and charges to approximately 84V.
This makes the BMS suitable for many 72V-class electric scooter and EV battery packs, provided the vehicle’s controller current requirement remains within the BMS and battery-cell limits.
13. Compatibility Check Before Ordering
Before purchasing, confirm:
- Battery chemistry is NMC / Li-ion
- Cell nominal voltage is approximately 3.6–3.7V
- Battery configuration is exactly 20S
- Nominal pack voltage is approximately 74V
- Normal maximum charging voltage is approximately 84V
- Continuous current requirement is within 40A
- Same-port wiring suits your battery design
- Balance connector and wire sequence match the pack
Do not select a BMS only by the advertised “72V” rating. Battery chemistry, number of series cells and current requirement must all match.
14. Installation Note
Correct installation of a 20S BMS is critical.
Before connecting the balance harness:
- Verify the voltage of all 20 series groups
- Confirm balance-wire sequence from B- upward
- Measure voltage between consecutive balance wires
- Verify correct B- and common-port connections
- Insulate all high-current joints
- Use suitably rated power cables and connectors
- Confirm NTC placement against the battery cells
Incorrect balance-wire connection can permanently damage the BMS.
Professional installation is recommended for high-voltage EV battery packs.
15. Safety Note
Do not:
- Use with the wrong battery chemistry
- Use with an incorrect number of series cells
- Reverse battery polarity
- Connect the balance harness incorrectly
- Exceed the 40A continuous-current rating
- Short-circuit the battery terminals
- Operate with damaged cells, insulation or cables
Always verify the complete battery pack and wiring before connecting the BMS.
