JBD JIABAIDA 17S 50A BMS for 60V NMC Li-ion Battery with Balance – ZP20S007-T
₹1,799.00
JBD JIABAIDA 17S 50A hardware BMS designed for 17-series 3.7V NMC / Li-ion battery packs used in electric scooters, EVs and custom lithium battery systems.
- 17S NMC / Li-ion BMS
- 62.9V Nominal Battery Voltage
- 71.4V Normal Full-Charge Voltage
- 50A Continuous Charge & Discharge Rating
- Common Port / Same Port Design
- Built-in Cell Balancing
- Approx. 50mA Typical Balance Current
- Integrated temperature monitoring
- Overcharge & over-discharge protection
- Over-current & short-circuit protection
- Compact aluminium-covered hardware BMS
- Suitable for 60V-class electric scooter and EV lithium battery packs
Important: This unit is configured for 17S 3.7V Li-ion / NMC cells. Always confirm battery chemistry, series configuration and current requirement before installation.
2 in stock
1. Product Overview
The JBD JIABAIDA ZP20S007-T V1.0 17S 50A BMS is a hardware Battery Management System designed to protect and manage 17-series lithium-ion / NMC battery packs.
The actual unit is marked:
- Brand: JBD / JIABAIDA
- Model: ZP20S007-T V1.0
- Battery Chemistry: Li-ion 3.7V
- Configuration: 17S
- Continuous Current: 50A
- Port Type: Common Port
- Balancing: Built-in Balance Function
The ZP20S007 platform is designed for 16–20S lithium battery configurations and supports continuous-current variants between 30A and 60A.
2. Electrical Specifications
- Battery Chemistry: NMC / Li-ion
- Cell Nominal Voltage: 3.7V
- Series Configuration: 17S
- Nominal Pack Voltage: 62.9V
- Normal Full-Charge Voltage: 71.4V
- Continuous Charge Current: 50A
- Continuous Discharge Current: 50A
- Port Configuration: Common Port / Same Port
- Quiescent Consumption: ≤60µA
- Circuit Resistance: ≤10mΩ
- Operating Temperature: -20°C to +75°C
- BMS Type: Hardware BMS
The manufacturer specifies same-port charging and discharging, ≤60µA consumption, ≤10mΩ circuit resistance and -20°C to +75°C operating temperature for the ZP20S007 family.
3. Battery Voltage Configuration
For a 17S NMC battery pack:
Nominal Voltage
17 × 3.7V = 62.9V
Normal Maximum Charge Voltage
17 × 4.2V = 71.4V
This configuration is commonly used in 60V-class lithium battery systems.
The manufacturer’s BMS protection specification allows cell voltage monitoring across approximately 2.7V to 4.25V per cell. The 4.25V figure is a protection threshold and should not be confused with the normal recommended 4.2V charging target for standard NMC cells.
4. Built-in Cell Balancing
The BMS includes integrated balancing to help maintain uniform voltage across all 17 series groups.
Balance Specifications
- Balance Function: Built-in
- Balance Type: Pulse Equalization
- Typical Balance Start Voltage: Approx. 3.90V per cell
- Typical Balance Current: Approx. 50mA
- Specified Balance Current Range: 40–60mA
Cell balancing helps reduce voltage differences between series groups during charging and supports stable long-term battery pack operation.
5. Common-Port Design
This unit uses a Common Port / Same Port configuration.
Charging and discharging share the same controlled current path, helping simplify battery-pack wiring compared with separate-port BMS designs.
This configuration is well suited to electric scooters, electric motorcycles and other applications where the charge and discharge connections are designed around a common BMS port.
6. Battery Protection Functions
The ZP20S007 platform provides multiple layers of battery protection, including:
- Cell overcharge protection
- Cell over-discharge protection
- Charging over-current protection
- Discharging over-current protection
- Short-circuit protection
- Charging high-temperature protection
- Charging low-temperature protection
- Discharging high-temperature protection
- Discharging low-temperature protection
- MOSFET temperature protection
- Cell balancing
- Cell-disconnection protection
These functions help protect the cells and battery pack from abnormal electrical and temperature conditions.
7. Cell Voltage Protection
Typical manufacturer protection thresholds for the NMC configuration are:
- Overcharge Protection: Approx. 4.25V/cell
- Overcharge Recovery: Approx. 4.15V/cell
- Over-discharge Protection: Approx. 2.70V/cell
- Over-discharge Recovery: Approx. 2.90V/cell
These are BMS safety thresholds, not recommended everyday charging and discharging targets.
8. 50A Current Protection
For the 50A version, the manufacturer’s protection table specifies approximately:
- Continuous Current: 50A
- Charge Over-current Protection: 95A ±20A
- Stage-1 Discharge Over-current Protection: 95A ±20A
- Stage-2 Discharge Over-current Protection: 380A ±30A
- Short-Circuit Protection Reference: 760A ±50A
The connected vehicle or equipment should normally operate within the BMS’s 50A continuous-current rating.
9. Physical Specifications
- Approx. BMS Length: 120 ±1mm
- Approx. Width: 65 ±1mm
- Approx. Height: 14 ±2mm
- L × W × H: 120 × 65 × 14 mm
- Protective metal cover
- Heavy-current cables
- Multi-wire cell-voltage sensing harness
- Temperature sensing support
The dimensions refer to the BMS structure and do not include the complete external wiring harness.
10. Suitable Applications
Suitable for compatible 17S NMC / Li-ion battery packs used in:
- Electric scooters
- Electric motorcycles
- Electric bicycles
- Electric three-wheelers
- Light electric vehicles
- Robotics
- AGVs
- Custom 60V lithium battery packs
- Industrial lithium battery systems
- Battery-powered equipment
11. Ideal for 60V Electric Scooter Batteries
A 17S NMC battery has a nominal voltage of approximately 62.9V, making this BMS particularly suitable for many 60V-class electric scooter battery packs.
The 50A continuous-current rating also makes it appropriate for medium-power EV battery applications, provided the motor/controller current requirement remains within the battery and BMS limits.
12. Compatibility Check Before Ordering
Before purchasing, confirm:
- Battery chemistry is NMC / Li-ion
- Cell nominal voltage is approximately 3.6–3.7V
- Battery configuration is exactly 17S
- Normal maximum pack charging voltage is approximately 71.4V
- Continuous current requirement does not exceed 50A
- Common-port wiring is suitable for your battery design
- Balance-wire sequence matches the pack
Battery voltage alone is not enough to select a BMS. Chemistry, series count and current rating must all match.
13. Installation Note
Correct balance-wire connection is critical.
Before plugging the balance connector into the BMS:
- Verify all 17 series groups individually
- Confirm the balance-wire sequence
- Measure voltage between consecutive balance wires
- Confirm correct B- and common-port connections
- Insulate all high-current terminals
- Use cables and connectors rated for the required current
Incorrect balance-wire sequence can permanently damage the BMS.
Professional installation is recommended for high-voltage lithium battery packs.
14. Safety Note
Do not:
- Use with the wrong battery chemistry
- Use with a different number of series cells
- Reverse BMS polarity
- Exceed the 50A continuous-current rating
- Short the battery terminals
- Connect balance wires in the wrong order
- Operate with damaged cells, insulation or wiring
Always verify the complete battery pack before connecting the BMS.
